The Patented Feed Chopper™, exclusively from Highline, is a secondary processing option to create shorter cut lengths.
The Feed Chopper™, exclusively from Highline®, is a secondary processing option to create shorter cut lengths. Rather than stationary knives that pulverize or drag leaves off of stems, the Highline® Feed Chopper™ truly slices through the hay creating an optimal consistency. The Feed Chopper™ is a great alternative to tub grinders.
Feed Chopper™ Blades
The Feed Chopper™ is designed with 128 blades spinning at 3,000 rpm to provide a uniform blend of shorter cut lengths of roughage. The blades are sharpened on both sides; once a blade is worn out or damaged simply flip the blade over for a sharpened edge.
Adjust Your Throw Profile
If your needs change, your throw profile can easily be adjusted by simply removing the 2 hair pins on either side of the Feed Chopper™ and adjusting the angle of the deflector pan.
Finished feeding and need to bed? The Feed Chopper™ can be easily disengaged for bedding purposes.
The Feed Chopper™ can be added as a field installed option to the CFR 650, CFR 651 and CFR 960 Bale Pro®s.